EME 60cc Auto Start, RC Gas Engine Includes with Muffler

The EME line incorporates 100% reliable parts, 6-12V RCEXL ignition (not a copy), Walbro carb, and bearings made in Japan (not a copy).

Produced with modern CNC and casting production methods.

Slightly lighter than other motors in its class the EME60 weighs only 1710 grams including the muffler and ignition, which is just slightly more than a DLE55.

The EME 60CC is worth a try to replace an old tired motor or for your next project.

Like the rest of the EME line, the factory pays close attention to the timing of this motor, resulting in noticeably better general running and a great smooth operation.

EME has recognized the shortcoming of other motor lines and really stepped up their quality.

For example, a genuine Walbro carb not a copy, look at other popular motors in this class they use a copy.

Make sure to check out some of the subtle but effective nuances incorporated into this motor.

Such as a longer throttle arm on the carb resulting in smoother operation and saves servo wear.

The mount design allows for shorter stand off's resulting in less vibration.

Even the packing material was considered. No more blowing foam out of the cylinder and wondering of you got it all out.

Are you aware of the reed block mod on the popular motors, to get smooth air into the engine?

EME is and they designed the reed block in a manner to allow smooth clean airflow.
The drill guide is the same as the DLE55 sold here.
Includes Free NGK CM6 Plug
Includes an 18-month warranty serviced in the USA.

Specifications:

Displacement: 60 cc
Weight: 3.7 lb. (1710g) Engine - 3.06lb (1390g), Muffler - .39lb (180g), Ignition - .3lb (140g)
RPM Range: 1,350-7,500
Output: 6.2 hp @ 7,200 rpm
Requires: unleaded gasoline, oil, ignition battery & propeller
Includes: electronic ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs
Suggested Propellers: 23x10, 24x8, 24x10 (3-blade: 21x12, 22x10) - Same prop bolt pattern as the DLE55

Technical Data:

Ignition Battery: 6-12V
Compression Ratio: 7.6:1
Gas/Oil Mix: 30:1 ~ 35:1
Replacement Spark Plug: NGK CM6 or equivalent
Ignition: Rcexl
Carb: Walbro

How-to video by JustPlaneCrazy: