{"product_id":"gator-rc-control-horn-24mm-triangle-base-angled","title":"Gator RC 24mm Triangle Base Control Horn – Angled Nylon","description":"\u003cp\u003e\u003cstrong\u003eA compact angled control horn with a wide 50×24mm triangle base, purpose-built for RC aircraft that need a stable, high-footprint mount without the added length of a larger horn. At just 6.9 grams, it delivers precise pushrod geometry and a rock-solid mount in a lightweight package.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24mm angled control horn\u003c\/strong\u003e — compact length with angled geometry for precise off-axis pushrod alignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide 50×24mm triangle base\u003c\/strong\u003e — distributes load across a large footprint for a stronger, more stable mount than standard rectangular bases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.8mm thread size\u003c\/strong\u003e — compatible with standard RC linkage hardware and clevises\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight at 6.9 grams\u003c\/strong\u003e — minimal weight impact for the stability and strength it provides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled horn profile\u003c\/strong\u003e — reduces binding on off-axis pushrod runs for smoother, more consistent control response\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold individually\u003c\/strong\u003e — order the exact quantity you need per build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorn length:\u003c\/strong\u003e 24mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorn thread size:\u003c\/strong\u003e 2.8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase dimensions:\u003c\/strong\u003e 50 × 24mm (triangle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.9 grams\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorn style:\u003c\/strong\u003e Angled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Elevator, rudder, ailerons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e GRC-CH-206\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e 1 × control horn (each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × triangle base plates\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— flat top plate and angled\/curved bottom plate that sandwich the control surface for a secure, gap-free clamp mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × aluminum pivot post (main shaft)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— silver cone-shaped piece that passes through the control surface and acts as the pivot point for the linkage arm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × clevis \/ link arm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— small black arm with hole at the end; connects to your pushrod or servo linkage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × self-tapping mounting screws\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— secure both base plates directly to the control surface; no pre-drilling required on most foam and balsa surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × clevis pin bolt + nut\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— small screw and nut set that connects the clevis arm to the aluminum pivot post\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eRequired to complete\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePushrod linkage (size dependent on setup)\u003c\/li\u003e\n\u003cli\u003eClevis or ball link compatible with 2.8mm thread\u003c\/li\u003e\n\u003cli\u003eMounting screws and backplate or reinforcement (airframe dependent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmall to medium RC airplanes needing a wide-base, stable horn mount\u003c\/li\u003e\n\u003cli\u003eElevator, rudder, and aileron control surfaces\u003c\/li\u003e\n\u003cli\u003eSport, scale, and aerobatic aircraft\u003c\/li\u003e\n\u003cli\u003eBuilds where shorter horn length is preferred over the 34mm version\u003c\/li\u003e\n\u003cli\u003eApplications where pushrod routing angle benefits from an angled horn profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the angled horn profile suits your pushrod routing geometry before installing\u003c\/li\u003e\n\u003cli\u003eAlign the horn pivot point directly with the control surface hinge line for correct throw geometry\u003c\/li\u003e\n\u003cli\u003eUse appropriate reinforcement or backplate on the control surface, especially on balsa or foam builds\u003c\/li\u003e\n\u003cli\u003eVerify full linkage travel is free and unrestricted through the complete deflection range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy choose a triangle base control horn?\u003c\/h3\u003e\n\u003cp\u003eStandard rectangular base control horns concentrate mounting load on two screw points. The triangle base spreads that load across a wider footprint with additional screw placement options, reducing the risk of pull-through on foam or balsa control surfaces and providing a more rigid, rattle-free installation over time. Combined with the angled horn profile, this is a purpose-built upgrade for builders who want clean geometry and long-term reliability.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdiv style=\"background-color: #f5f5f5; padding: 12px; border-radius: 6px;\"\u003e\n\u003cstrong\u003eModeler's tip:\u003c\/strong\u003e If you need more throw or leverage on larger control surfaces, consider the Gator-RC 34mm triangle base angled horn (GRC-CH-213) — it shares the same 50×24mm base footprint but provides greater mechanical advantage for bigger aircraft. The 24mm version is the sweet spot for sport and mid-size scale builds.\u003c\/div\u003e","brand":"Gator-RC","offers":[{"title":"Default Title","offer_id":46988309070046,"sku":"GRC-CH-206","price":4.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/1436\/6686\/files\/24mm_control_horn4.png?v=1777831115","url":"https:\/\/www.gator-rc.com\/products\/gator-rc-control-horn-24mm-triangle-base-angled","provider":"Gator RC","version":"1.0","type":"link"}