{"product_id":"gator-rc-control-horn-34mm-triangle-base-angled-w-clevis","title":"Gator RC 34mm Triangle Base Control Horn – Angled w\/ Bearing Clevis","description":"\u003cp\u003e\u003cstrong\u003eA precision RC linkage component combining a 34mm angled control horn, wide triangle base, and integrated bearing clevis in a single ready-to-install unit. The triangle base provides a broad, stable mounting footprint, while the bearing clevis eliminates slop for crisp, consistent control surface response.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e34mm angled control horn\u003c\/strong\u003e — optimized geometry for precise pushrod alignment and reduced binding\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide triangle base (50 × 24mm)\u003c\/strong\u003e — distributes load across a larger surface area for a stronger, more stable mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated bearing clevis\u003c\/strong\u003e — eliminates slop and friction for smooth, accurate control response\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.8mm horn thread\u003c\/strong\u003e — compatible with standard RC linkage hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2mm clevis bolt\u003c\/strong\u003e — precise fit through the bearing for a secure, play-free connection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLightweight at 8.7 grams\u003c\/strong\u003e — minimal weight penalty for the added strength and precision\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorn length:\u003c\/strong\u003e 34mm (1-5\/16 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorn thread size:\u003c\/strong\u003e 2.8mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClevis bolt diameter:\u003c\/strong\u003e 2mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase dimensions:\u003c\/strong\u003e 50 × 24mm (triangle)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.7 grams\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorn style:\u003c\/strong\u003e Angled with integrated bearing clevis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Elevator, rudder, ailerons\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e GRC-CH-213\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e 1 × control horn with bearing clevis (each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × 34mm triangle base angled control horn with bearing clevis (each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eRequired to complete\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePushrod linkage (size dependent on setup)\u003c\/li\u003e\n  \u003cli\u003eMounting screws compatible with your control surface (airframe dependent)\u003c\/li\u003e\n  \u003cli\u003eBackplate or reinforcement as needed for the control surface material\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMedium to large RC airplanes requiring a wide-base, high-stability horn mount\u003c\/li\u003e\n  \u003cli\u003eElevator, rudder, and aileron control surfaces\u003c\/li\u003e\n  \u003cli\u003eSport, scale, and aerobatic aircraft\u003c\/li\u003e\n  \u003cli\u003eBuilders wanting a clevis pre-integrated into the horn assembly\u003c\/li\u003e\n  \u003cli\u003eApplications where pushrod angle requires an angled horn for proper geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe angled horn design compensates for off-axis pushrod routing — confirm the angle suits your airframe geometry before installing\u003c\/li\u003e\n  \u003cli\u003eAlign the horn pivot point with the control surface hinge line for correct throw geometry\u003c\/li\u003e\n  \u003cli\u003eThe 2mm bolt passes through the bearing clevis — ensure it is fully seated and secured\u003c\/li\u003e\n  \u003cli\u003eUse appropriate reinforcement or backplate on the control surface, especially on balsa or foam builds\u003c\/li\u003e\n  \u003cli\u003eVerify full linkage travel is free and unrestricted through the complete deflection range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhy choose a bearing clevis horn?\u003c\/h3\u003e\n\u003cp\u003eStandard clevises can develop slop over time as the pin wears against the horn. A bearing clevis eliminates that wear point entirely — the bearing rotates smoothly around the 2mm bolt without side-load friction, maintaining precise, consistent control response across thousands of cycles. Combined with the wide triangle base, this horn delivers both mounting stability and linkage precision in one compact unit.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdiv style=\"background-color:#f5f5f5; padding:12px; border-radius:6px;\"\u003e\n\u003cstrong\u003eModeler's tip:\u003c\/strong\u003e The angled horn geometry is especially useful when your pushrod exits the fuselage or wing at an angle that would cause binding with a straight horn. The triangle base also gives you more screw placement options for a rock-solid mount on thicker control surfaces.\n\u003c\/div\u003e","brand":"Gator-RC","offers":[{"title":"Default Title","offer_id":46988313133278,"sku":"GRC-CH-213","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/1436\/6686\/files\/triangle-base-with-bearing-clevis_1.png?v=1777827579","url":"https:\/\/www.gator-rc.com\/products\/gator-rc-control-horn-34mm-triangle-base-angled-w-clevis","provider":"Gator RC","version":"1.0","type":"link"}