{"product_id":"gator-rc-control-horn-34mm-triangle-base-angled","title":"Gator RC 34mm Triangle Base Control Horn – Angled Nylon","description":"\u003cp\u003e\u003cstrong\u003eThe largest horn in the Gator-RC triangle base angled control horn lineup — a 34mm angled horn on a wide 24×49mm triangle base, sold as a complete ready-to-install set. Includes both base plates, aluminum pivot post, clevis arm, 4 self-tapping mounting screws, and clevis pin hardware. At 7.8 grams, it delivers the mechanical advantage and wide-footprint stability needed for mid-size to larger RC aircraft where a compact horn won't provide enough throw or leverage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e34mm angled control horn\u003c\/strong\u003e — 1-5\/16 inch horn length provides greater mechanical advantage and longer throw for larger control surfaces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide 24×49mm triangle base\u003c\/strong\u003e — spreads mounting load across a broad footprint for greater stability than standard rectangular bases\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.8mm thread size\u003c\/strong\u003e — compatible with standard RC clevises and linkage hardware\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLightweight at 7.8 grams\u003c\/strong\u003e — aluminum construction keeps weight minimal despite the larger horn size\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAngled horn profile\u003c\/strong\u003e — reduces binding on off-axis pushrod runs for smooth, consistent control response\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete hardware kit\u003c\/strong\u003e — both base plates, pivot post, clevis arm, 4 self-tapping screws, and clevis pin bolt and nut all included; no extra hardware needed to install\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSandwich clamp mounting system\u003c\/strong\u003e — top and bottom base plates clamp around the control surface for a secure, rattle-free installation without requiring a separate backplate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorn length:\u003c\/strong\u003e 34mm (1-5\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorn thread size:\u003c\/strong\u003e 2.8mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase dimensions:\u003c\/strong\u003e 24 × 49mm (triangle)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.8 grams\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorn style:\u003c\/strong\u003e Angled\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Elevator, rudder, ailerons\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e GRC-CH-211\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e 1 × control horn (each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2 × triangle base plates\u003c\/strong\u003e — flat top plate and angled\/curved bottom plate that sandwich the control surface for a secure, gap-free clamp mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1 × aluminum pivot post (main shaft)\u003c\/strong\u003e — silver cone-shaped piece that passes through the control surface and acts as the pivot point for the linkage arm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1 × clevis \/ link arm\u003c\/strong\u003e — small black arm with hole at the end; connects to your pushrod or servo linkage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4 × self-tapping mounting screws\u003c\/strong\u003e — secure both base plates directly to the control surface; no pre-drilling required on most foam and balsa surfaces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1 × clevis pin bolt + nut\u003c\/strong\u003e — small screw and nut set that connects the clevis arm to the aluminum pivot post\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eRequired to Complete\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePushrod or threaded rod compatible with 2.8mm thread (size dependent on setup)\u003c\/li\u003e\n  \u003cli\u003eServo with adequate torque for your control surface size and deflection requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMid-size to larger RC airplanes requiring a wide-base horn with increased mechanical advantage\u003c\/li\u003e\n  \u003cli\u003eHigher-throw and longer-travel control surface applications\u003c\/li\u003e\n  \u003cli\u003eElevator, rudder, and aileron linkages on sport, aerobatic, and scale builds\u003c\/li\u003e\n  \u003cli\u003eAircraft where a standard rectangular base horn lacks the footprint stability needed for the control surface material\u003c\/li\u003e\n  \u003cli\u003eBuilders stepping up from the 15mm (GRC-CH-204) or 24mm (GRC-CH-206) who need the maximum horn length in the triangle base family\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe two base plates sandwich the control surface — position them so the angled\/curved bottom plate conforms to the underside of the surface before tightening\u003c\/li\u003e\n  \u003cli\u003eThe aluminum pivot post passes through both base plates and the control surface — drill a clean hole sized to the post diameter before installation\u003c\/li\u003e\n  \u003cli\u003eDrive the 4 self-tapping screws evenly to clamp the base plates firmly without cracking or deforming the control surface material\u003c\/li\u003e\n  \u003cli\u003eAlign the pivot post directly over the control surface hinge line for correct throw geometry\u003c\/li\u003e\n  \u003cli\u003eAttach the clevis arm to the pivot post using the included pin bolt and nut — apply a small amount of thread-lock to prevent vibration loosening in flight\u003c\/li\u003e\n  \u003cli\u003eAt 34mm, this horn produces significant mechanical leverage — verify servo torque is adequate for your control surface size and deflection requirements\u003c\/li\u003e\n  \u003cli\u003eConfirm the angled horn profile suits your pushrod routing geometry before final installation\u003c\/li\u003e\n  \u003cli\u003eVerify full linkage travel is free and unrestricted through the complete deflection range before flight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhy Choose a Triangle Base Control Horn?\u003c\/h3\u003e\n\u003cp\u003eStandard rectangular base control horns concentrate mounting load on just two screw points. The triangle base spreads that load across a wider footprint with additional screw placement options — reducing the risk of pull-through on foam or balsa control surfaces and providing a more rigid, rattle-free installation over time. At 34mm horn length, this is the largest option in the Gator-RC triangle base lineup, offering maximum throw and mechanical advantage while retaining the wide-base mounting security the triangle design provides.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdiv style=\"background-color:#f5f5f5; padding:12px; border-radius:6px;\"\u003e\n\u003cstrong\u003eModeler's tip:\u003c\/strong\u003e Not sure which triangle base horn size is right for your build? The 15mm (GRC-CH-204) is ideal for small aircraft and low-throw setups. The 24mm (GRC-CH-206) suits mid-size sport planes. This 34mm is the largest in the family — best for bigger aircraft needing maximum mechanical advantage. All three share the same triangle base footprint design for consistent mounting geometry across your fleet.\n\u003c\/div\u003e","brand":"Gator-RC","offers":[{"title":"Default Title","offer_id":46988313559262,"sku":"GRC-CH-211","price":3.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/1436\/6686\/files\/control_horn_34mm.png?v=1777846216","url":"https:\/\/www.gator-rc.com\/products\/gator-rc-control-horn-34mm-triangle-base-angled","provider":"Gator RC","version":"1.0","type":"link"}