CA Model Voyager 2M F3A Pattern Biplane ARF - Multi Color Scheme
Couldn't load pickup availability
CA Model Voyager Composite 2M F3A Pattern Biplane ARF
The CA Model Voyager is a full-composite, fully painted F3A biplane designed by Jason Shulman and AC Glenn, who flew it at the 2026 US Nationals. Every airframe component is molded composite and painted, including the wings and horizontal stabilizers. Supplied as an ARF in CA Model's standard scheme with an accessories pack, the Voyager accommodates a single-drive or contra-drive power system with a 3.23 in. (82 mm) spinner.
Earlier CA Model wings and stabilizers used foam-cored, balsa-sheeted or built-up construction with film covering. The Voyager moves to molded, painted composite construction throughout, bringing the same finish approach to the fuselage, wings, and stabilizers.
Key Features
- Full-composite construction with a fully painted finish, including wings and stabilizers
- All internal structures installed
- Center-hinged, in-mold control surfaces
- Detachable ailerons, elevators, and rudder
- Single-bolt wing attachment
- Quick-release interplane struts
- Carbon fiber stabilizer tubes and main landing gear
- Removable battery tray with carbon rods
- Compatible with single-drive and contra-drive power systems
- Standard CA Model scheme; custom colors and layout available to order
Technical Specifications
| Manufacturer / Model | CA Model / Voyager |
|---|---|
| Aircraft type | F3A pattern biplane |
| Completion level | ARF |
| Length | 78.54 in. (1,995 mm) |
| Wingspan | 71.65 in. (1,820 mm) |
| Net weight | 5.51 lb. (2,500 g) |
| Gross weight | 10.80–11.02 lb. (4,900–5,000 g) |
| Construction | Full composite, fully painted |
| Power compatibility | Single drive or contra drive |
| Spinner size | 3.23 in. (82 mm) |
What's In The Box
- Voyager full-composite, fully painted ARF airframe in CA Model's standard scheme
- Accessories pack
- Lightweight wheels with axles
- Wheel pants
- Carbon fiber main landing gear
- Tail wheel assembly
- Stabilizer adjusters
- Aluminum control horns set (8)
- Ball link set
- Removable battery tray with carbon rods
- Carbon fiber stabilizer tube
Sold separately: Power system, servos, radio equipment, and other equipment required to complete the aircraft.
Servos Required
| Ailerons | 4 mini-size servos |
|---|---|
| Elevators | 2 mini-size servos |
| Rudder | 1 high-torque medium-size servo |
| Total | 7 servos |
Complete Your Build: Single Drive
Use a compatible single-drive power system with a 3.23 in. (82 mm) spinner. Select the motor, ESC, batteries, and propeller as a matched system. Requires four mini aileron servos, two mini elevator servos, and one high-torque medium-size rudder servo, plus compatible radio equipment. Specific power-system models and ratings are not specified.
Complete Your Build: Contra Drive
Use a compatible contra-drive power system with a 3.23 in. (82 mm) spinner. Select the drive, ESC, batteries, and contra-propeller set as a matched system. Requires four mini aileron servos, two mini elevator servos, and one high-torque medium-size rudder servo, plus compatible radio equipment. Specific power-system models and ratings are not specified.
Setups & Tips
- CG: 7.09 in. (180 mm) from the top wing, as supplied in the setup notes. Confirm the exact measuring reference before balancing.
- Upper and lower wing incidence: +0.6° on both wings
- Stabilizer incidence: 0°, adjustable
Verify the balance reference and setup settings during assembly before flying.
Competition Background
Designed by Jason Shulman and AC Glenn and flown by them at the 2026 US Nationals, the Voyager was developed for F3A precision aerobatics. Its fully molded, painted wings and stabilizers mark a departure from CA Model's earlier film-covered flying surfaces.
Contact Gator RC for help planning your Voyager build or to discuss ordering a custom scheme in your own colors and layout.
Full or partial professional building services may be available for this aircraft. Contact Gator RC before ordering to discuss the desired power system, electronics, equipment, and completion options.
This airplane is excluded from standard free-shipping promotions. Shipping charges or freight arrangements may be required depending on the destination. Please contact Gator RC if you need a shipping estimate before ordering.
