Falcon 30x13 Beechwood Propeller for Gas RC Airplanes

Falcon 30x13 Beechwood Gas Propeller

The Falcon 30x13 Beechwood Gas Propeller is designed for large gas-powered RC airplanes that need efficient forward flight, smooth throttle response, and stable performance under load. The 30x13 configuration is a higher-pitch setup that can support stronger forward speed when matched correctly to the engine and airframe.

Built from top-grade German beechwood, this propeller provides a lightweight and rigid design suitable for large-scale sport, aerobatic, and scale aircraft applications.

Best For

• Large sport and aerobatic gas RC airplanes
• Scale aircraft requiring efficient forward flight
• Pilots looking for more forward speed than lower-pitch options
• Properly matched gas setups where a 30-inch propeller is recommended

Typical Engine Class Range

This propeller is commonly used on larger gas-powered RC aircraft that prioritize efficient forward flight and stable RPM under load.

• Large 70cc–85cc class gas engines, depending on aircraft type, exhaust setup, RPM range, field elevation, and flying style.

Some larger or lighter-load setups may also use this size, but engine load and RPM must be verified carefully. Always follow your engine manufacturer’s recommended propeller range before installation.

Precision Construction

This propeller features a factory-drilled 10mm center hole, approximately 0.3937" or 25/64". Falcon wood gas propellers are individually inspected and factory pre-balanced to help reduce vibration. Final balance verification is recommended before use.

Key Features

• German Beechwood Construction: Lightweight, rigid wood construction helps provide responsive throttle feel and dependable performance.
• Higher-Pitch Performance: The 13-inch pitch can support increased forward speed and efficient cruising flight when properly matched to the aircraft and engine.
• 30-Inch Gas Propeller Size: Suitable for properly matched large-scale gas aircraft that call for a 30-inch propeller.
• Responsive Throttle Feel: Wood construction can help provide lighter rotational mass compared with some heavier propeller designs.
• Efficient Blade Profile: Blade design supports smooth airflow and stable performance during demanding flight conditions.
• Factory Pre-Balanced: Pre-balanced to help reduce vibration, with final balance verification recommended before installation.
• Individually Inspected: Each propeller is inspected for consistency and finish quality.

Technical Specifications

Propeller Selection Note

A 30x13 propeller is generally a speed-oriented option compared with lower-pitch propellers of the same diameter. It may provide increased forward speed and efficient cruising flight when the engine has enough power to maintain RPM under load.

If your setup needs easier spool-up, stronger acceleration, or more low-speed pull, a lower-pitch option such as a 30x10 or 30x12 may be a better match. If your aircraft is lighter, cleaner, and properly powered, the 30x13 may be appropriate for stronger forward speed and efficient flight.

Important Safety Reminder

Always inspect the propeller before use. Check for cracks, chips, warping, shipping damage, hub fit, bolt pattern, spinner clearance, engine RPM range, and ground clearance before flying.

Why Buy from Gator RC?

Gator RC carries Falcon propellers for serious RC pilots looking for dependable performance and quality construction. We can help match the right propeller size to your aircraft, engine combination, and flying style.